Household Induced Draft Fan 60W 3 Leaves Chimney Fan Stove Smoke ​Extractor Dust ​Induced Draft Fan Exhaust Smoke Machine

Electric Draft Inducing Fan Solve Smoke Problems Help Exhaust Fireplaces, Pizza Ovens, Wood Stoves Chimney Fan is for use where flue gas temperatures do not exceed 575 degree F for intermittent operation, and 482 degree F for continuous operation. Specification: Product name: Electric Draft Inducing Fan Voltage: 190-240V( 110V-120V voltage, we will be equipped with a voltage converter) Installation method: Very simple: install the induced draft fan on the chimney exit, run a cable in a suitable place in the room and connect it to a single 220V power supply. (Please turn off the device when installing or removing to avoid electric shock.) Note: 1. Turn off the power switch when installing or removing to avoid electric shock. 2. The interface to the smoke outlet must be fastened with waterproof insulating tape. 3. The installation at the interface with the chimney must be firm and the interface must be tightly integrated into the chimney for the best effect. Scope of delivery: 1 x induced draft fan

• VOLTAGE - The operating voltage of the product is 220V( 110V-120V voltage, we will be equipped with a voltage converter),the chimney induced draft fan is used by leaving two ends of the wire for connection to the power source.
• FOR FLUE DIAMETER - 60W Chimney Fan for Flue Diameter 9-16cm/12-16cm.
• NO NOISE - One of the most common complaints when it comes to powerful cooling fans is that they make a lot of noise. Luckily, our oscillating fan ensures a quiet operation so you don't have to compromise when it comes to the comfort of your home.
• APPLY TO - It is very suitable for fireplace accessories/Pizza Ovens/ Wood Stoves. The chimney induced draft fan creates an exhaust and induces the rapid release of smoke to prevent the smoke from escaping smoothly from the chimney due to the poor chimney.
• NOTE - The household fireplace uses an induced draft fan and the outlet temperature should not exceed 60 degrees. Otherwise the induced draft fan will be damaged. Install the power cord with at least 0.5 square copper wire.